Butterfly Valve Seal

The butterfly valve seal is an essential component for blocking all the potential leakage from sealing of pipes, flanges and operating shars, in shut-off valves,flap valves and disk valves.Butterfly valves seal is available in NBR and Silicon with the sizes of 3”,4”,6”,8”

Dome Valve Seal

We manufacture Insert Seal for Dome Valve.

The inflatable dome valve seal is available in silicon, neoprene with reinforcement for dome valve. These Dome valve seals are used in dense phase or pressure pneumatic conveying for fly ash handling system in coal fired boilers in power plant.

We also offer inflatable seals in silicon, neoprene & food quality rubber seal with reinforcementfor dome valve, these seals are used in dense phase or pressure pneumatic conveying for fly ash handling system in coal fired boilers in power plant.

Industries where dome valve insert seals are used

  • Ash handling plants
  • Coal-fired power stations
  • Food processing
  • Pharmaceutical processing
  • Chemical processing
  • Waste incinerators

Materials of elastomers

  • Silicone
  • Food grade quality Silicone
  • NBR Nitrile
  • Neoprene-Chloroprene
  • EPDM -Ethylene-Propylene
  • HNBR -Hydrogenated Nitrile
  • Viton-Flurocarbon(FKM)

Our inserts seals range is available in following sizes:

  • 50NB– 2 INCHES
  • 80NB– 3 INCHES
  • 100NB – 4 INCHES
  • 150NB – 6 INCHES
  • 200NB – 8 INCHES
  • 300NB – 12 INCHES

O Rings

O Rings are available in Natural ,NBR Nitrile , Neoprene,EPDM ,Silicon and Viton Rubbers. We can manufacture O-Rings from 20mm ID or OD size to 500 mm ID or OD size.
Truber Rubber O rings are available in all sizes upto 1000mm diameter and in Nitrile/ NBR, HNBR,- Natural,Neoprene, EPDM Silicon, Vition, Aas Rubber Materials.
We make VITON O RINGS from 50 mm to 400mm at competitive rates.

Pipe Joining Gaskets

Used as Pipe Joining gaskets in Pipe Fittings of Cast Iron,Ductile iron and HDPE Pipe. It is available in Natural and EPDM Rubbers.
Available In Sizes : 63, 75, 90, 110, 160, 200, 225, 315, 400 MM

Moulded Rubber Products

Truber manufactures the below rubber moulded products
  • RUBBER SEALS
  • RUBBER GASKETS
  • RUBBER WASHERS
  • RUBBER BUSHES
  • RUBBER BELLOWS
  • RUBBER DIAPHRAGMS
  • RUBBER O RINGS
  • RUBBER TO METAL BONDED SEALS

Silicon Oil Seal

We are actively involved in manufacturing and supplying Silicone Oil Seal. Our products find great usage in motorcycles, agricultural machinery, exercise equipment,trailers and trucks for providing sealing solutions.

Marine Rubber Fender

It uses Compressed air as buffer medium to soften the ship's collision with dock or another ship. Compared with normal spring rubber fenders (such as used tyre fender and solid core rubber fender), it has advantages of large shocking energy absorption, low unit area pressure reacting on ship, excellent impact-fatigue resistanc, simple and easy installation and so on.
Capacity width we can make from 75 mm to 150 mm

Pipe Sealing Rubber SWR

Pipe Sealing
PVC SEALING RUBBER RING . Truber Rubber Sealing rings are used in pipe joint and it is available in 3",4" and 6" as PVC RUBBER SEALING RINGS in NATURAL and EPDM.
SWR Rings
SWR Rings is oered in diverse sizes that include 50mm, 63mm, 75mm, 90mm, 110mm, 125mm, 140mm and 160mm.In addition, the qualities available are general and customized. Owing to their sturdy construction these can also withstand adverse condition.

Bellows

Rubber Bellows
Rubber bellows are manufactured using high-grade chemicals,polymers and other materials,obtained from acclaimed vendors of the market. Made in consonance with the international quality regimes these products are assured for their tough design, high strength and durability.
Axle Boot
Axle Boot are Used as shock absorbers in the most critical areas, we provide these products using the most high grade raw material in available in the industry. Rigid quality testing and compliance to industry norms is also ensured for Optimum Utility.

Water filter O ring

We manufacture high quality and durable O rings used in the Water filter housings to prevent water leakage in the equipment.Also available in Food Grade.

Water Pump Seal

We manufacture high quality and durable rubber for all water pumps.

PU (Poly Urethane) - Seal

We manufacture high quality and durable PU seal.

Exhaust Silencer Hanger

This good quality durable exhaust hanger also called as silencer hanger or muffler hanger used in automobile car parts .we have most of the sizes used in Nissan,Toyota.Volkswagen and we can make as per your size

Coil Spring Booster

This good quality durable Booster used in automobile car parts. We have most of the sizes used in Trucks.

Pipe Stopper Rubber Sealing Rings

Truber Manufacture Pipe Stopper Sealing Rings for sizes upto 48" and in varieties of materials including Natural Rubber,NBR, Neoprene, EPDM,Silicon, Viton suited for High Temperatures and Harsh Chemical Environments.

Metal To Rubber Bonding

Small Oripice Flexible Plug Is Used in Oil and Gas Industry plug is used in oil and gas industry.Available in NITRILE and HNBR -Hydrogenated NBR dart plugs are available in all sizes from 2-3/8” to 24” and in small orices, shallow centre, deep cup flexible plug variants.

Hood Adjuster

We manufacture high quality hood adjusters.

PTFE Coated Diaphargms

PTFE Diaphragm is widely used in Oil chemical industries,Coal industries, paper making, weave, food, beverage,pharmaceutical and bio processing industries.
PTFE Diaphragm Application:
  • Food processing industry
  • Electronics industry
  • Sanitary application
  • Water and waste processing application
  • Chemical and refinery
  • Pharmaceutical industry
  • Chemical production

EPDM Roofing Sheet

EPDM water proong membrane is available in 1.2 mm thick,width 1500 mm length upto 30 meters .It is 55 times more reliable water strong than PVC sheet and you can stretch which will not tear.

Rubber Sheets

Available in Natural, Nitrile, Neoprene, Epdm and Silicon.Sizes available from 3 mm thickness to 25 mm thickness, it is available cloth inserted rubber sheet also.
Truber Rubber sheets are available in all sizes upto widths of 2 meters and lengths of 100 meters roll and in natural,Nitrile, Neoprene, EPDM, Silicon, VITON Rubber Materials

Rubber Cords

  • Natural Rubber cords
  • Nitrile Rubber cords
  • Neoprene Rubber cords
  • Silicon Rubber cords
  • EPDM rubber cords
  • Viton Rubber cords

Conventional Packer Elements

We manufacture high quality conventional packer elements.

Top & Bottom Cementing Plug

These cementing plugs are Used in oil and gas industry.Cementing plugs are available in NBR and HNBR hydrogenated. We have exported cementing plugs to many clients in UK, Canada and Middle West.
Top and bottom cementing plugs are available in sizes from 3-1/2” to 13-3/8” and they are made up of aluminium / phenolic / urethane inserts moulded to SBR / NBR / HNBR / Natural Rubbers.
Available sizes : 2-3/8”, 2-5/8”, 2-7/8”, 3-1/4”,3-1/2”, 4”, 4-1/4”, 4-1/2”, 5”, 5- 1/2”

Downhole Packer Elements

Packer element is used in oil and gas industry .Packer element is available in NBR,HNBR,VITON,AFLAS.We have supplied to parties in Canada USA UK and Middle East.
Packer Elements are available in NBR / HNBR / SILICON / VITON / AFLAS Rubber Material and resistant to high temperatures and harsh chemical environments we have the available sizes,
  • 4-1/2” x 2-3/8” Arrowset
  • 5-1/2” x 2-7/8” Arrowset
  • 5-1/2” x 2-7/8” Arrowset
  • 5-1/2” x 2-7/8” Baker
  • 6-5/8” x 2-7/8” Arrowset
  • 7” x 2-7/8” Arrowset
  • 7” x 2-7/8” Hydro Grip Packer
  • 9-5/8” Element

Bonded Seal

Truber Manufactures BSP Dowty Seals in the following sizes : 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"

Threaded Rubber Bush

We are Offering a Qualitative and Comprehensive range of Rubber Bushings.These are made up of high grade quality material matching with the industrial norms. Our Products fulfill the requirements of the clients and are offered as per specifications laid by them.

Flange Gasket

We manufacture Flange Gaskets in sizes upto 36" and in Nitrile, EPDM, Silicon, EPDM,Neoprene, Viton Materials.

Extuded Rubber Profile

We are Truber manufacture Rubber Extruded Proles in Natural,Nitrile, Neoprene ,silicon ,Viton and EPDM.

Silicon Diaphragm

Silicon diaphragm pressure sensors have been fabricated by anodic oxidation etch-stop to reduce the pressure sensitivity variation. The diaphragm thickness is precisely controlled by automatic etch-stop in hydrazine-water solution. p-Type piezoresistive elements are fabricated by boron ion implantation on a (100) orientation n-type epitaxial layer.Silicon driaphragm are coming with fabric insertion and resistant to temperatures upto 250C.

Neoprene Gasket

Truber manufactures all sizes of Neoprene Gaskets upto 1000 mm Diameter at very competetive rates.

Pharmaceutical Rubber Wads

Manufactures a complete assortment of Pharmaceutical Rubber Wads in variety of Diameters and in Neoprene, Silicon, Butyl,SBR,Latex Materials Two pieces Induction Heat Seal covers a wide range of containers, providing a hermetic seal against leaks,contamination and oxidation. Two-piece liners form a fused seal to container,which must be cut or pierced for removal, leaving an aluminum seal on the container land area.